Plavix For Sale, It's been a long time, and I've been so busy with so much different stuff going on, including a couple of cosplay meets and the biggest shoot of my life - Manifest - but I wanted to give a quick update. Plavix dose, I'm currently up in sunny Queensland with Naomi, visiting her parents, Plavix trusted pharmacy reviews. Where can i cheapest Plavix online, I'm up here for 5 days, and Naomi is staying for 10, Plavix cost. Order Plavix from mexican pharmacy, I have a lot of photo processing from Manifest waiting for me when I get home :)
The first night here, Nomes and I went to watch the sun set from a nearby park, Plavix class, Plavix overnight, and I couldn't help myself but take a few shots. I spiced them up a bit by adding some off camera flash, Plavix no rx. Pics below followed by how I took them, Plavix For Sale. Buy Plavix no prescription,
[flickr]photo:3873632621[/flickr]
[flickr]photo:3874419148[/flickr]
[flickr]photo:3874419352[/flickr]
[flickr]photo:3874419716[/flickr]
- Camera: Canon EOS 5D MkII
- 1/200sec, f/6.3, my Plavix experience, Order Plavix no prescription, ISO 100
- Canon 580EX on 1/4 power, with orange gel to camera right
I wanted to get a portrait shot of Nomi enjoying the beautiful sunset, is Plavix safe, Where can i buy cheapest Plavix online, with the sun in shot. I knew, cheap Plavix no rx, Plavix interactions, however, that this would put Naomi into silhouette and stop any features from showing, buy Plavix online no prescription. Buy Plavix without a prescription, I could possibly have used a reflector to get light back onto her face, but I went the easy (and more expensive!) option of an off camera flash, purchase Plavix. Where can i find Plavix online, I stuck my 580EX on the plastic foot and put that on my tripod (I didn't bring any light stands on the trip) and put it at about 45 degrees to Naomi to the right.
A few test shots were used to change the settings on the camera and the flash to get the balance right, purchase Plavix for sale, Buy cheap Plavix no rx, and I added the CTO orange gel to warm up the cool blue flash light to match the warm setting sun. The result, Plavix dosage, Buy Plavix without prescription, even though the angle for the light is wrong, looks quite natural, Plavix use. Effects of Plavix, For the last shot above, I simply put the flash on the picnic table there and shot it up into the tree to make it stand out against the sky, low dose Plavix. Plavix steet value. Plavix schedule. Plavix australia, uk, us, usa. Plavix from mexico. Plavix coupon. Where can i order Plavix without prescription. Plavix recreational. Buy generic Plavix. Buy Plavix from mexico. What is Plavix. Where can i buy Plavix online. Online Plavix without a prescription. Online buying Plavix. Plavix used for.
Similar posts: Colchicine For Sale. Buy Macrobid Without Prescription. Atenolol For Sale. Buy Atenolol Without Prescription. Buy Cafergot Without Prescription. Order Aricept no prescription. Zithromax pharmacy. Stromectol results. My Amikacin experience. Reglan schedule.
Trackbacks from: Plavix For Sale. Plavix For Sale. Plavix For Sale. Plavix For Sale. Plavix For Sale. Plavix steet value. Get Plavix. Plavix cost. Plavix without a prescription. Plavix treatment.
I've been wanting to experiment with cross-lighting a subject with flash and the sun, ever since I
read about it on Strobist. The effect can be very cool, but I knew I'd need some practice.
Leif was over again this weekend, and we were practicing photography together again, so he (only slightly reluctantly) agreed to pose for me again so that I could try it out. These were shot on a handy baseball pitch, which could be a useful location in the future.
I was using two bare flashes, a Canon 580EX and a Vivitar 285HV. Most of the time they were both set to full power, to match the sun, and were on stands 2-4 meters away from Leif.
Canon camara right, 45deg from camera. Vivitar, camera left 90deg from camera. Beware the GROIN BEAM!
[flickr]photo:2328077780[/flickr]
Same setup as previous but with Leif blocking the sun, and the Vivitar moved back a bit.
[flickr]photo:2327260905[/flickr]
As above
[flickr]photo:2327261099[/flickr]
Sun camera right at about 100deg. Canon camera left at about 80deg. Vivitar directly below camera set to 1/4 for fill.
[flickr]photo:2328079620[/flickr]
As above but the Vivitar directly behind Leif at 1/1 power to provide a rim light.
[flickr]photo:2328079772[/flickr]
[flickr]photo:2299322791[/flickr]
A slightly different view of one of my most often used pieces of photographic equipment, my white shoot-through umbrella and stand.
I was browsing through
Strobist's favourites on Flickr, as I often do, and I was inspired by
this photo of an American penny to try taking a macro photo of a coin again. I tried shooting a coin with my
macro tubes the
very first day they arrived. I've learned a lot since then, so I put that to use when shooting the following pictures. These are a couple of New Zealand coins, which we brought back from our holiday a couple of years ago,
[flickr]photo:2271277136[/flickr]
[flickr]photo:2270484181[/flickr]
There are a number of considerations I had to take into account when shooting these photos. I used a similar lighting setup to the one I used very successfully to photograph the
fossilised shrimp. This worked particularly well on the copper 10c piece. For some reason, copper really "glows" when lit in this way, as can be seen in the above photos and the American penny I linked to above. The wrap-around light highlighted the texture dramatically.
To get the whole coin in focus, I shot with the lens set to f/11, and pointed the camera straight down to keep the focal plane parallel to the coin itself.
[flickr]photo:2271277402[/flickr]
[flickr]photo:2271277506[/flickr]
When I shot the silver 20c piece in the same way, I discovered it to be flat and boring, so I thought I'd apply some of the lessons I'd learned from reading the fantastic book
Light: Science and Magic
. Getting metallic surfaces to look interesting and lively is all about controlling reflections. Silver surfaces have no colour of their own, they only reflect the light that's around them. When I was shooting straight down, the coin was reflecting the dark lens of the camera. The light was coming from a low angle to the side, so it looked like a black disk with thin white lines at the detail.
This looked fine with the copper coin, but it was simply ugly with the silver. If I was going to get any light on the shot, I'd have to angle the camera, so I rolled the tripod down and looked across the coin. Have a look at the setup shot below. A test shot revealed it was reflecting the wrap-around white paper diffuser beautifully, but whereas before it was all black, now it was all white. The detail was again flat and boring. I needed something black to reflect in the coin, and I needed to position it precisely in the "family of angles". That wasy it would be reflected just enough, but not too much in the coin. I grabbed the closest handy black object, the lens cap.
[flickr]photo:2270484535[/flickr]
Using my ever-useful "helping hands" (which I'll return to in a future blog post), I suspended the lens cap such that the reflection appeared to cover half the coin. The fact that the lens cap is circular added a nice shape to the reflection: curved, rather than straight across the middle. The effect would have been nicer with a new, unscratched coin. Here the dark half is distinctly grey due to the scratches scattering the light.
Lighting wasn't the only problem affected by the change in viewing angle. Now that the coin is tilted with respect to the plane of focus, parts of the coin would be out of focus. I stopped down the aperture two stops to f/22 to widen the depth of field, and spent a long time manually focusing the lens to place the focal point where it looked best.
In Lightroom, I noticed that none of the photos escaped without some parts being over or under exposed. So I cheated slightly. I processed the RAW file into three separate TIFF files, one exposed for highlights, one for shadows and one in the middle. I then merged the three with
Enfuse GUI and then played with the fused file in Photoshop, bringing in and manually blending the various layers a bit to have more control over the exposure. I also selected and brightened the background to make it mostly white, but keeping the shadow.
Don't you just love the designs of the New Zealand coins? The fearsome faces are very cool.
In each issue of Connect, the Bead Society of Victoria's quarterly magazine, they feature a member's bead challenge. This time the them was "Seaside". This detailed necklace which was made by Carmel Manley was voted most favourite by fellow bead members.
Following that is the setup for the shot, for those interested.
[flickr]photo:2270377377[/flickr]
[flickr]photo:2271169730[/flickr]
[flickr]photo:2270377677[/flickr]
Recent Comments